| Type |
Price |
Quantity/Size |
2"X 12"
EZ212-PC-10
|
$73.02
|
|
3"X 12"
EZ312-PC-10
|
$92.21
|
|
3"X 15"
EZ315-PC-10
|
$103.76
|
|
3"X 35"
EZ335-PC-05
|
$119.12
|
|
4"X 15"
EZ415-PC-10
|
$126.80
|
|
4"X 30"
EZ430-PC-05
|
$122.98
|
|
5"X 30"
EZ530-PC-05
|
$149.86
|
|
5"X 45"
EZ545-PC-05
|
$219.02
|
|
6"X 10"
EZ610-PC-05
|
$80.69
|
|
6"X 30"
EZ630-PC-05
|
$180.59
|
|
|
|
To be used as a means to provide temporary splinting for the patient. This versatile new splinting material is another unique ezywrap product. Our splinting material is available in widths ranging from one to six inches. Compliant polypropylene padding encases the substrate splinting material providing an excellent interface while allowing ready access to the splinting material. ezysplint is available in precut sizes and our patented dispenser rolls. Available today.This versatile new splinting material is another unique ezywrap product. Our splinting material is available in widths ranging from one to six inches. Compliant polypropylene padding encases the substrate splinting material providing an excellent interface while allowing ready access to the splinting material. ezysplint is available in precut sizes and our patented dispenser rolls. Available today.
|
- Universal Size
- Use 1" or 2" for most pediatric finger splint applications
- Use 2" or 3" for most adult finger splint applications
- Use 3" or 4" for most thumb or wrist splint applications
- Use 4" or 5" for most forearm, ankle, and leg splint applications
- Use 5" or 6" for most large adult sized splint applications
Please contact customer service for sizing questions.
|
|
- Measure proper width
- Measure length
- Cut material
- Push substrate back into foil,then back into and beyond opening of box, clip to seal foil.
- Stretch edges
- Wet splint (using preparation guidelines)
- Dry splint
- Properly apply splint
- Position as prescribed by physician
|
Hot water will increase the exotherm of the splint as it cures. Cool water is recomended. Instruct the patient that the splint may feel warm as it is being applied.
The finished ezysplint™ is water- resistant and can be cleaned by hand-washing with mild detergent. To dry, blot with a towel and then use a hair dryer. Advise the patient not to wear the splint when it is wet, as the moisture may cause skin irritation.
Store in a cool, dry location.
|
|
|
|
|
Remove splint from foil pouch. Pull padding slightly beyond substrate to cover rough edges.
|
Pass under cool faucet (70°-85° F). Roll or fold splint onto itself and squeeze out excess water. CAUTION: Hot water will increase exotherm during cure.
|
|
|
|
|
Lay splint on a towel and roll snugly and squeeze to remove additional water. Repeat to remove remaining water.
|
Place splint on patient and wrap with elastic bandage. Mold splint to patient's limb for 2-4 minutes until splint sets. Monitor patient according to standard procedures.
|
|
|
E-mail this product to a friend
